The quality of the brand of printing products depends on many factors, so it is necessary for manufacturers to pay more attention to the relevant matters when printing, so as to avoid the impact of problems. Here are a few things to consider.
Master the characteristics of applied printing ink. According to different regulations of printing pieces in the brochure （such as high-end, medium and low block customer printing goods）， characteristics of printing paper and post-press processing technology, the use of different characteristics （such as high-end, medium and low block） printing ink, preservatives, moisture-proof agents, adhesives… And other auxiliary materials.
Print the trademark logo, LOGO, advertising pages of magazines, magazines and pictures to save one more. After printing, all the trademark logo, logo and advertising pages of the first issue of magazines, magazines and pictures are arranged in a folder name, which is convenient for the color calibration of each issue after printing.
If there is inconsistent light ink in the printed brochure, the machine equipment staff has the obligation to mark out or remove. Machine equipment staff can also be separated and marked out with a note, to candidate page group quality inspection staff accurately removed, to prevent the injection of unqualified products into the next process.
The identification card should be filled in for printing thin paper, and the machine and equipment staff should clearly put forward the difficult points and remove the bad printing number, so as to avoid the unqualified products being injected into the next process.
Do a good job in keeping the sample print number. After the customer and the person in charge of printing sign the samples to determine the best light ink goods to use a big pen to delimit the frame to do a good job of retention sample identification, to ensure that the customer printing products retention sample printing without product quality problems.
When drawing samples, we should check whether the color is in line with the specifications of the sample. There is no ink skin, no dry water, no drag flower, no bottom, no sticky flower, no sticky after rolling the barrel. Register text and positive and negative sides; Side gauge, pressure tank, provisions are consistent, the plate is clean.
Ji 'nan printing and packaging manufacturers think that if the printing plate adjustment in the whole process of printing should pay attention to light ink, all colored goods can not be retained as samples. When printing the back, if the equipment or the actual operation is unstable, part of the sample should be removed, and then the machine can operate printing after the equipment runs normally.
Improve the product printing brand will pay more attention to the relevant matters is so, if you want to know more questions or matters, welcome to this www.703248.com for consultation.
講解的內容 更多的內容 請咨詢公司官網http://www.703248.com/